How to wash a car engine.?. ..


The car needs both the external and internal cleaning.
Take a look at the main reasons for the need to wash the engine.
1. The presence of oil in the engine compartment can cause a vehicle fire. So you should fix some oil leaks.
2. In the result of the accumulation of dirt, soot and soot-forming layer and retain heat, may occur overheating of the engine.
3. To service and to diagnosis to clean the engine better.
 

If you just take it and send to the engine of the water jet, it will flood everything (sensors, connectors, and so on) that may lead to malfunction of the vehicle in the worst case, or simply to drying and disassembly of the main connectors.
If you all decided to wash the engine must comply with the following recommendations:
- Optimally should be washed cold engine in hot weather, it is advisable to conduct its fall and spring.
- When washing, do not use gasoline or diesel, because when a small static spark petrol will ignite and diesel fuel without certain tools are difficult to remove.
Major appliances, you must close the foil and remove the battery.
Large dirt is removed using a scraper and warm water. And then apply the cleanser.
In the process of cleaning should only use special detergents, and not all in a row.
- After applying the cleanser, expect for a few minutes, and washed everything with a brush. Opolskie plain water and allow time to dry.
If you use a compressor or vacuum cleaner when the regime blowing the drying process can be accelerated. When engine is completely dry, remove the tape from the main electrical appliances, installed the battery, and you can make car.