Thread: Good braking is regular replacement of brake fluid

 
Replace brake fluid on the advice of specialists in the run up to 40t km or two years, taking into account the mode of operation. If the replacement is not to produce on time, the braking efficiency is reduced because the force from the pedals to the brake mechanisms of the system are not transmitted.
Brake fluid must have certain properties to withstand high temperatures, have a thermal resistance, frost resistance, good lubricity, non-corroding parts, to be neutral with respect to the system components, gaskets and seals. To distinguish mineral composition, glycol, silicone fluids. The advantage of a mineral is the lack of hygroscopicity, silicone fluid does not absorb moisture, but have a high compressibility, poor lubricating properties. The widespread use of various compounds, glycols for the manufacture of brake fluid justified their properties.
Poor liquid is one of the reasons of failure brake system. During operation, dust, steam and air quality worsens, the need for replacement check diagnostic equipment on the car. Brake fluid is better to change completely, mixing is possible in the short term. When replacing find out what design brake system, and can work independently or only in the service station.
For condition monitoring systems use sensors, which indicate a low level in the tank, but in order to minimize malfunctions, you need to monitor the level , use the recommended fluid to adhere to the replace mode.
The fluid level is checked periodically, as it consists of non-volatile components, a sharp reduction should not occur, but the reason for the low level may be leakage in the working or the main cylinders, damaged hoses, when the brake pads wear, the wear of the brake master cylinder sleeves or cuffs brake cylinders of the wheels. Brake fluid leak occurs as a result of wear of the parts of the system. Over time, the operation of the system it is best to remove the air that enters the hydraulic drive in the repair of individual nodes or replacement fluid. When removing the air watching the level in the tank.
Highly efficient and reliable operation will ensure brake fluid recommended by the manufacturer, it is compatible with all rubber and metal parts of the car that meets all technical requirements.