Of course, when you color wheels with your handsthe painting will be different from the painting in the service, where special equipment is used. But by and large, not only the number of hours of work. And this is just the first disc. The following disks will be easier, as you will gain the experience and skill.



Dyeing discs in garage

We will start making the necessary material and equipment. Peskostrujstvo we will replace electric drill with a variety of nozzles. With these tips you can apply to the polished glass and body of the car. So do not feel sorry for money to purchase these accessories.

From paints, cooking Primer in the bottle and Acrylic paint. Varnish it is advisable to buy from the same manufacturer as the paint. Why not powder and acrylic? Of course, powder paint is much better, but to apply it, special equipment is required.

Sand-blasting and thermal camera in the garage is not everyone. But if there is, the better for you. Then you can buy powder paint. Purchase paints that have reliable suppliers to the paint was not on shelf life has expired.

Having prepared the necessary materials is for preparation of various grit sandpaper to degrease the surface we need solvent and rags. And we can start painting drives.

Prepare the surface of the disk

Before you start painting, we should remove the old cover. Drive my detergent and a brush that imperceptible manner borrowed from his wife. It would be better if we use attachment on a drill to carefully wash the wheels.

Before painting the drive requires processing of its entire surface. Handle drill with nozzles for polishing the body. And sandpaper in the hard-to-reach places and the curved section, from time to time by rinsing with water.

Apply sand paper in this order: Nos. 200-400-600. During Emery, it is desirable to apply the finish car shpaklevku, to eliminate defects. You are not a new drive, so be sure there will be bugs.

Gruntuem the surface of the disk

An important step in painting, is Primer. After oškurili drive, be sure to obezžirivaem solvent № 646 and begin to blot. Let's start with the inner side, spraying the primer, like all aerosol paints, at a distance of 25-30 cm. The container is stirred up from time to time, and uniformly overlay layer.

Of course, it is better if the primer will be applied in three layers. Each layer give time to dry out. After being dealt a third layer, Produce forced drying of the surface. You can use for this purpose a wife.

Paint and varnish covering

Painting procedure differs little from primers, so detailed it will not zaostrâtsâ. The entire painting manufacture in the same sequence as the first coat. To comply with security measures during application. Protect eyes glasses, hand gloves.

As mentioned above, we use the same brand of varnish and paint. Varnish manufacture according to the instructions for its use.

That's all! Now you can safely install wheels on a car. I wish you great luck to all motorists.