Glue? Put? To catch? What is the ideal fastening mobile phone in the car?
We know, we can't use cell phones during traffic. In this case, there are "phandc fries" of different mats, as well as the pherphone-buy, if it is necessary to simultaneously run and talk to someone far away. We won't argue with the law. But many phones are able to turn into navigators and are ready to tell the road-that's where they need some support. Once again, placing the phone in secure fastening, it is easier to charge. The contact with the Bluetooth automotive multimedia is also comfortable with strong support under the phone. The main methods of attachment are three: sucka (on the windscreen), adhesive layer (on any flat surface) and splits (shutter shutter). Separate models are multi-mount on the method of installation: first glue the record, then put the suckard on it, and so on. What's better than that? The one that does not deform the interior, is easily dismounted, does not interfere with the visibility, does not grumble on the roughness, does not drop the phone under the pedal and allows one movement to grab the apparatus, others-to insert it back without being distracted from the road. But we still haven't found the ideal among the sold samples. Therefore, consider this material a starting point for automotive accessories manufacturers. They may be aware of these errors, and yet they will create an untroubled phone-holder. DETAILED: PRISONER + Lightener. Doesn't ruin the elements of the salon. -Close the survey. With a strong inclination of the glass, it is possible to place only at the top-otherwise it cannot be reached. And the long arm in motion is constantly rocked, especially if the phone is massive. The parking lot attracts the attention of a beetle. CAR UNIVERSAL HOLDERED: Fly, Indicative Price: 350 rubles. A reference to the glass pane of the pane or to the flat surface of the torpedo through the disc is adhesive. It can hold not only the phone, but also a 5-inch navigator. There's a place for a photo or a different picture under a detachable glass. Mini Handy-TelefonhalterDeclared producer: Richter, Indicated price: 650 rubles. A peat or flat surface of the torpedo is cut through the attached disc with the adhesive layer. Adjustment of position-flexible arm-stalk. Soft lining is available under the cover of the telephone. "Chao Hui Industries", Indicative producer price: 360 rubles. Vacuum-attached holder, with fixation on the glass. The hinges allow it to be oriented in several directions. It is more likely to be on smartphones than on phones: "skinny" articles with a width less than 50 mm does not want to be kept. The generic holder of the PDA and the phone of the KOTOZ-stated producer: "KOTO Industries Incorporated", Indicative Price: 500 rubles. A refit to the glass or a flat surface of a torpedo by vacuum-crate or intermediate disc with adhesive layer. The corners of the rotation and the width of the occupation of the telephone/communicator are regulated. The screw mechanism of creating a vacuum. On CLE-BASED + You can fix on a rough surface that is not available for suckers: torpedo, door, etc. -One-time securing. Mobile phone holder GT-REDZatil: Seiko, Yonade-Indicative Price: 310 rubles. Apply the sticky side to the vertical surface or attach to the ribs of the deflation with the help of the latch. It is only a big brand and a Japanese lineage to give such a price to the uncunning product. Sounds like a rattle in the path. The phone is beyond 38 mm wide, don't even try!Mobile phone holder of "PAK" Declared Manufacturer: " Service Best B. B. The cost of the project is estimated at $3 billion. A very simple product of which you can easily and easily remove a phone and place it in place. The tape is cut to a flat and vertical (if possible) surface. The area of the mounting tape is small. And the smartphone doesn't fit!CRYSTAL cell phone maker CRYSTAL SIDE POCKET, declared manufacturer: "SunGreat", Taiwant-Indicative price: 150 rubles. It's for the phone. And a pack of cigarettes! No bottom: it is desirable to have a product above the arm. The flat phone is falling apart, the wide phone is not inserted. The bottom part is actually disposable. The decorative pad fell off. The design of the national. Holder at Kioki-stated manufacturer: "Kioki Company Limited", Kitaidat Price: 60 roubles. Very miniature. She keeps the phone from the side, it's awkward to put it back in. No support from the bottom, the machine is not going to slip out on the floor. It will be rep after removing the protective film from the adhesive layer. However, the 3M adhesive tape is good. Holder for PHANTOMZ-stated producer: "Stople LLS", Kitayasan Price: 180 rubles. After removal of the protective film, the membrane is stuck in a comfortable place at the expense of the layer of layer. When incoming calls are received, the LEDs will blink. The adjustment is by means of a "pens". During the tests, the vibrations fell off with the phone ...THE CAUSES OF DEFECTOR + can help if there is no place to stick or lean. -Wants on the move. The use of the deflector blinds of the deflector. A breakdown is possible for both the rubble and the deflector. Mini handle-telephone halterZabello: Richter, GermanyIndicated price: 390 rubles. Two spring-loaded holders will be refill, with a very strong one. We can adjust the tilt angle. Suitable both horizontal and vertical deflection chinks. But it is very difficult to remove the holder!CILLE THREE + Do not glue, crouching and scratching-actually works only for friction. After dismantling the tracks, there is no remaining trace. -It's not an easy one: it's just a playground. And if you want to temporarily remove them, where to hide it? The grooves are grooves, sometimes sticki. Universal GPS Nav-Mat Manufacturer: Brackettron, Kitative Price: 1000 Rub. A sticky lining of a torpedo into which a flat platform for the holder is mounted (the one in the photo is not included in the kit!). The closer the surface of the panel is to the horizontal, the better. The holder itself needs to be acquired separately. After the withdrawal, no trace is left. It's holding tight. Universal mobile electronics Nav-Matclaimed producer: Bracketron, Cytaius Price: 1000 rubles. A pretty heavy lining below the holder (the one in the photo, is not included!) allows you to strengthen the phone or the Navigator in the panel if it has a relatively horizontal section. Solid mass and high friction coefficient reliably hold the entire structure. But it looks big.